アフィリエイトプログラム
Step 1: Fill the Cup
Add tap water or drinking water to the stainless steel cup until the water reaches the MIN line. Place the cup on a flat surface and avoid filling above the marked line.
Step 2: Insert the Silicone Mold
Gently place the silicone mold into the cup. Press it down slowly and evenly until it is fully seated. A small amount of water may come out through the vent opening during this step.
Step 3: Freeze for 16+ Hours
Place the assembled mold upright on a flat surface in the freezer. Freeze for at least 16 hours. A longer freezing time may be needed depending on the freezer temperature and how often the freezer door is opened.
Step 4: Remove the Silicone Mold
Take the mold out of the freezer. Hold the stainless steel cup securely and carefully pull the silicone mold out of the cup. Do not twist or force it excessively.
Step 5: Let the Mold Rest
Leave the silicone mold at room temperature for about 2 minutes. This allows the outside of the ice to loosen slightly, making the mold easier to open.
Step 6: Open the Mold
Gently open the silicone mold and remove the clear ice ball. Slight bubbles, minor cloudiness, or a small opening at the bottom of the ice ball may occur and are normal.